|
Ignition Wire Processing Machine
Bring your Ignition Wire processing into the 21st century with the MTX Ignition Wire Processor. This system has been specially outfitted to handle the unique demands of processing ignition wire for the automotive and OEM markets. The MTX-Ignition System is ideal for processing ignition wires from 5-10 mm; wire with carbon core, copper core, and other conductors (either folding or crimp or straight crimp); end feed or side feed terminals with straight or angled barrels; and terminals with single, double or triple crimp.
To request more information on this product click here.
Download
Product Printable PDF 
 Features:
- TU-10 Servo Crimping Stations
- Special Guide Kit
- Special Blade Configuration and Knock-out
- Extended Swing Arm Stroke
- Large Wire Gripping Jaws
- Special Core Wiping Unit
- Modular Crimping Tooling with Quick Change without Tools
- Heavy-duty Terminal Chop-off with Scrap Collection
- 2 or 4 Meter Collectors
- Optional Programmable Crimp Height Setting
- Optional Checking of Continuity after Crimping
- Optional Automatic Removal of Completed Wire
Specifications:
Technical Data
Wire Sizes: 5-10mm Ignition wires. (Carbon core, copper core, and other conductors.)
Wire Lengths: 51mm to 100M (2" to 325')
Strip Lengths: 0 to 16mm (0 to 0.630")
Longer strip lengths may be possible with additional tooling
Terminals: End feed and side feed, fold and crimp or straight crimp. Electrical Requirement: 208 to 480 Volt, 3 Phase, 50 or 60 Hz
Air Requirement: 2.4 l/sec.@ 6 Bar (5 CFM @ 80 PSI)
Dimensions (LxWxH):
With Passive Collector: 3175mm x 1730mm
1840mm (125 in x 70 in x 73 in.)
With 4M Collector: 5850mm x 1730mm x 1840mm
(230 in x 70 in x 73 in.)
Height with guard open: 2900mm (114 in.)
Shipping Weight: MTX w/2 TU-10s – Approx. 1818kg (4000 lbs.)
Note: Specifications are subject to change without notice, and exceptions may apply depending on application, wire and other variables. Optional equipment may require standard machine modification and/or later specifications.
|